Zhejiang Ruipu Titanium Industry Co.,

Showing 1 - 10 of 12, total 2 pages [First] [Previous] [Next] [Last]

clad bar
Specification: Out Dia. 20-40mm Thickness of Titanium 1.0-2.0mm
Detail: Type: Cast + Extruded Grade: Ti+Cu (Core) Sizes: Out Dia. 20-40mm Thickness of Titanium 1.0-2.0mm Standard:as per customer's requirements

clad plate
Specification: Out Dia. 20-40mm Thickness of Titanium 1.0-2.0mm
Detail: Type: Cast + Extruded Grade: Ti+Cu (Core) Sizes: Out Dia. 20-40mm Thickness of Titanium 1.0-2.0mm Standard:as per customer's requirements

titanium square bar
Specification: &©|934;6-100mm
Detail: Type: Round and Square Grade: Most Alloys and Unalloyed C.P Grades Sizes: &©|934;6-100mm Standard: ASTM, AMS, MIL

titanium sheet
Specification: Thickness 0.5-4.75mm Width&©|8804;1000mm Length&©|8804;3000mm
Detail: Type: Cold Rolled Grade: Most Alloys and Unalloyed C.P Grades Sizes: Thickness 0.5-4.75mm Width&©|8804;1000mm Length&©|8804;3000mm Standard:ASTM, AMS, MIL, DMS, etc

titanium ring
Specification: &©|934;150-600mm Thick 35-150mm
Detail: Type: Forged Grade: Gr.1, Gr.2, Gr.3, Gr.4, Gr.5, Gr.7, Gr.9, Gr.11, Gr.12 Sizes: &©|934;150-600mm Thick 35-150mm Out Dia. 200-3000mm Inner Dia. 100-900mm Wall Thickness 40-400mm Height 40-700mm

the titanium bent pipe
Specification: &©|934;5-110?.0-4.5?000-6000(Have not sewn cold-rolledly )&©|65307;
Detail: The titanium bent pipe Trade mark Manufacturing engineering State Specification (mm) Voluntary standards GR1,GR2,GR3,GR7 GR9,GR11,GR12 Cold-rolled, weld , weld - cold-rolled, fasten and press M &©|934;5-...

titanium foil
Specification: 0.4-0.8?0-300?000 ASTM
Detail: Titanium foil material Trademark Condition of delivery Specification( thickness * width * length /mm) Voluntary standards GR1,GR2 M 0.4-0.8?0-300?000 ASTM Y 0.025-0.3?0-300?00

titanium pipe
Specification: &©|934;5-110?.0-4.5?000-6000(Have not sewn cold-rolledly )&©|65307;
Detail: The titanium managing Grade Manufacturing engineering State Specification (mm) Voluntary standards GR1,GR2,GR3,GR7 GR9,GR11,GR12 Cold-rolled, weld , weld - cold-rolled, fasten and press M &©|934;5-110?.0...

titanium screw
Specification: 1) Bolt sizes:M4-M22×Length
Detail: Product Name: Titanium Fastener, Bolt, Nut, Washer, Screw Place of Origin: China Specifications: 1) Bolt sizes:M4-M22×Length 2) Nut sizes:M4-M22 3) Washer sizes:M4-M22 4) Standard:DIN,ASTM,BS

titanium wire
Specification: Titanium wire
Detail: Titanium wire Trademark Condition of delivery Diameter(mm) Voluntary standards ERTi--1,ERTi--2, M 0.1-6.0 AWS,AMS,ASTM ERTi--3,ERTi--4 Y 2.0-6.0


Showing 1 - 10 of 12, total 2 pages [First] [Previous] [Next] [Last]
1 2